LOW-PRESSURE PREHEATERS
Intended use:
Low-pressure preheaters are designated for regenerative feedwater heating in steam turbine regeneration systems by cooling and condensation of steam collected from turbine intermediate stages.
Low-pressure preheaters manufactured by «BASET» Research & Production Company are designated for completing turbine plants of any capacity from 50 to 1200MW.
Design:
Low-pressure preheaters manufactured by "BASET" Research & Production Company are vertical cylindrical devices with top-mounted main condensate chamber and heat transfer surface made of U-shaped stainless tubes fixed in tube sheets by tube expanders. Some preheaters have built-in steam cooling zones (ОП) and condensate cooling zones (OK).
Technical specifications (ПН - a low-pressure preheater): | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Preheater type | Design parameters | Heat transfer surface area, m² (permissible variation ±5%) | Overall dimensions, mm | Heater | ||||||
Произв. | Давл. | Давл. | Heating | Con- | Con- | Steam | Heater | Heater | ||
ПН-100-16-4 | 465 | 16 | 0,39 | 425 | - | 100 | - | 1000 | 3700 | 4,0 |
ПН-100-25-6-2 | 153,6 | 2,5 | 0,6 | 240 | - | 100 | - | 1000 | 3600 | 4,1 |
ПН-100-25-6-3 | 172,9 | 2,5 | 0,6 | 240 | - | 100 | - | 1000 | 3600 | 4,1 |
ПН-100-25-6-4 | 172,9 | 2,5 | 0,6 | 240 | - | 100 | - | 1000 | 3600 | 4,1 |
ПН-350-16-7 | 575 | 1,6 | 0,68 | 400 | - | 326 | 24 | 1400 | 5827 | 10,5 |
ПН-350-16-7 | 575 | 1,6 | 0,68 | 400 | 29 | 321 | - | 1400 | 5827 | 10,4 |
ПН-350-16-7 | 575 | 1,6 | 0,68 | 400 | - | 350 | - | 1400 | 5827 | 10,5 |
ПН-325- | 468 | 1,96 | 0,68 | 275 | - | 324 | - | 1400 | 6150 | 13,6 |
ПН-360 | 468 | 1,96 | 0,68 | 275 | 45 | 315 | - | 1400 | 6435 | 13,5 |
ПН-405 | 468 | 1,96 | 0,68 | 275 | - | 405 | - | 1400 | 7030 | 14,0 |
ПН-400 | 610 | 2,6 | 0,7 | 400 | - | 400 | - | 1600 | 5625 | 14,0 |
ПН-400 | 686 | 2,6 | 0,8 | 400 | - | 400 | - | 1600 | 5625 | 14,0 |
ПН-550 | 780 | 2,5 | 0,6 | 320 | - | 541,5 | 38,5 | 1600 | 6470 | 17,0 |
ПН-550 | 780 | 2,5 | 0,6 | 320 | 28 | 550 | - | 1600 | 6730 | 18,1 |
ПН-550 | 660 | 2,5 | 0,6 | 320 | - | 580 | - | 1600 | 6450 | 17,6 |
ПН-550-25-6-IV | 660 | 2,5 | 0,6 | 320 | - | 580 | - | 1600 | 6450 | 17,4 |
ПН-670-2,5-0,1 | 681 | 2,5 | 0,1 | 310 | - | 670 | - | 1800 | 7560 | 22,6 |
ПН-580-2,5-0,7 | 805 | 2,5 | 0,69 | 310 | - | 576 | - | 1800 | 6970 | 20,8 |
ПН-680-2,5-0,7 | 822 | 2,5 | 0,69 | 310 | - | 628 | 50 | 1800 | 7625 | 23,0 |
ПН-600-2,5-0,6 | 660 | 2,5 | 0,6 | 320 | - | 650 | - | 1600 | 7050 | 17,9 |
ПН-600 |
880 |
2,5 |
0,6 |
320 |
50 |
560 |
- |
1600 |
7050 |
17,8 |
ПН-600 | 880 | 2,5 | 0,6 | 320 | - | 590 | 60 | 1600 | 7050 | 17,7 |
ПН-850 | 1310 | 2,5 | 0,6 | 350 | - | 740 | 130 | 1800 | 7700 | 22,5 |
ПН-1100 | 1310 | 2,5 | 0,6 | 350 | 120 | 840 | 158 | 2000 | 7950 | 28,5 |
ПН-1900 | 1940 | 3,2 | 0,6 | 320 | - | 1568 | 372 | 2600 | 8970 | 49,1 |
ПН-1900 | 1940 | 3,2 | 0,6 | 320 | 228 | 1388 | 324 | 2600 | 8970 | 50,2 |
*D1 - steam jacket diameter
Low-pressure preheaters are manufactured in compliance with customer specifications.